English 
Portuguese 
Spanish 
French 
Introduction
The watch crown is a key component for adjusting the functions of your watch, such as the time and date. However, in some cases, the crown can break or need to be replaced. In this guide, we will teach you step by step how to replace the watch crown efficiently and safely.
Step 1: Identify the type of crown
Before you begin the process of replacing your watch crown, it is important to identify the type of crown your watch has. There are different types of crowns, such as screw-down crowns and push-in crowns. Make sure you know what type of crown your watch has before proceeding.
Step 2: Gather the necessary tools
To replace your watch crown, you will need a few specific tools, such as a set of screwdrivers, tweezers, and a watch case. Make sure you have all the necessary tools before you begin the replacement process.
Step 3: Remove the damaged crown
The first step to replacing your watch crown is to remove the damaged crown. To do this, you will need to carefully open the watch case and use the tweezers to remove the old crown. Be careful not to damage other parts of the watch during this process.
Step 4: Clean the workspace
After removing the damaged crown, it is important to clean the work area to ensure there is no dust or dirt that could interfere with the installation of the new crown. Use a soft, dry cloth to gently wipe the area.
Step 5: Install the new crown
With your work area clean, it’s time to install the new crown into your watch. Make sure to position the crown correctly and use the proper tools to secure it in place. Be careful not to damage the new crown during this process.
Step 6: Test the functionality
After installing the new crown, it is important to test the functionality of your watch to ensure that the crown is working properly. Adjust the time and date on your watch to verify that the new crown is operating as it should.
Step 7: Close the watch case
With the new crown installed and working properly, it’s time to close the watch case. Be sure to close the case carefully to avoid damaging the watch’s internal mechanism.
Step 8: Adjust the crown
After closing the watch case, adjust the crown to ensure it is in the correct position. Make sure the crown is securely fastened and has no looseness that could compromise the functionality of the watch.
Step 9: Check the seal
Before completing the watch crown replacement process, check the case seal to ensure that the watch is protected from water and dust ingress. If necessary, replace the seal to ensure adequate protection.
Step 10: Test for water resistance
If your watch is water resistant, it is important to test the water resistance after replacing the crown. Place the watch in a container of water for a few minutes and check for leaks. If there is any leakage, review the crown replacement process.
Step 11: Final adjustment
After performing all necessary tests, make final adjustments to the watch to ensure everything is working properly. Make sure the crown is adjusted correctly and that the watch is operating normally.
Step 12: Regular maintenance
To ensure the longevity of your new crown and your watch as a whole, it is important to perform regular maintenance. Clean your watch regularly and check the functionality of the crown to prevent future damage.
Step 13: Final considerations
Replacing a watch crown may seem like a complicated process, but with the right tools and knowledge, it is possible to successfully complete the task. Remember to follow each step carefully and patiently to ensure that your watch continues to function perfectly.
